Name: London Studios Smart Motorways
Brand: VertexMods
Price: 32.40 USD
Availability: InStock

Video Preview

https://www.youtube.com/watch?v=0UCBJGTo94s https://www.youtube.com/watch?v=J9UuugTUcC4

Features

Control Panel - Our in-game control panel allows your players to easily set the icon or speed used above lanes in real time.
Remote Changes - Motorway gantries can be updated all around the map using one command, with a map allowing you to select your intended location to edit.
CCTV System - Easily view and move CCTV cameras on gantries all over the map from the control panel.
US / UK / EU Mode - Smart Motorways has support for three modes, including US, UK and EU. This means we support a wide range of different speeds straight out of the box for your server.
Smart Signs Integration - Smart Motorways is integrated with Smart Signs, meaning if you have a copy of both you will be able to add messages/icons on a new board above each gantry.
Smart Speed Cameras Integration - Smart Motorways is integrated with Smart Speed Cameras, meaning if you have a copy of both, the cameras on all gantries will become active and will adjust dynamically to the speed limit set above each individual lane, helping with speed enforcement.
Icon Support - As well as support for the speeds, we have icons including arrow left and lane closed.
Discord Logging - Our resource can integrate into Discord with logging by webhooks. This can log any changes on the motorway gantries and keep a record for the future.
Pre-Configured Signs - We’ve pre-configured over 60 locations around the map, meaning Smart Motorways is ready to use straight out of the box.
Memory Saving - Any changes made to Smart Motorways around the map will be saved in memory, meaning they will still be there after restarts. You can easily clear all signs with our /resetsmartmotorways command.
Emissive Textures - These icons are bright both at day and night, making them bound to grab the attention of drivers at all times of the day.
Multi Lane Support - We have support for two, three and four laned roads.
Add Locations Easily - With our developer command, you can easily add new locations in-game which are automatically saved for the next restart.

Config

config = {

    -- We've included speed options for the UK, EU, and US based servers 
    -- Simply type UK, EU, or US to change the speed options 
    iconPack = UK,

    -- If you add custom icons, you can add them here
    -- Speed-related icons will be used for speed cameras, and must contain the speed limit in the name as numbers only.
    -- E.g. an icon of speed_60 will be used for a speed limit of 60. An icon of 3_speed_40 would result in a speed limit of 340.
    -- Do NOT edit this section unless you know what you are doing and have modelled custom icons.
    iconPacks = {
        [UK] = {
            arrow_left,
            arrow_right,
            red_x,
            speed_20,
            speed_30,
            speed_40,
            speed_50,
            speed_60,
            national_speed,
        },
        [EU] = {
            arrow_left,
            arrow_right,
            red_x,
            speed_20,
            speed_30,
            speed_40,
            speed_50,
            speed_60,
            speed_70,
            speed_80,
            speed_90,
            speed_100,
            speed_110,
            speed_120,
            speed_130,
            speed_140,
            speed_150,
        },
        [US] = {
            arrow_left,
            arrow_right,
            red_x,
            bv_motorway_speed_15,
            bv_motorway_speed_20,
            bv_motorway_speed_25,
            bv_motorway_speed_30,
            bv_motorway_speed_35,
            bv_motorway_speed_40,
            bv_motorway_speed_45,
            bv_motorway_speed_50,
            bv_motorway_speed_55,
            bv_motorway_speed_60,
            bv_motorway_speed_65,
            bv_motorway_speed_70,
            bv_motorway_speed_75,
            bv_motorway_speed_80,
            bv_motorway_speed_85,
        },
    },


    cctvKeys = {
        up = {0, 172},
        down = {0, 173},
        left = {0, 174},
        right = {0, 175},
        leaveCam = {0, 200},
    },

    -- The distance in which the sign and its speed limits will load/unload at
    loadDistance = 200.0,

    -- This will enable debug printing on both the client and the server. This should be set to false most of the time.
    developerMode = false,

    integrations = {

        smartSpeedCameras = {
            enabled = false, -- Only enable if you have the Smart Speed Cameras resource installed and up to date 
            resourceName = SmartSpeedCameras, -- This is the name of the resource which Smart Speed Cameras is installed under
            cooldown = 60, -- This is the cooldown in seconds between speed camera detections. This is to prevent spam fines.
        },

        smartSigns = {
            enabled = false, -- Only enable if you have the Smart Signs resource installed and up to date 
            resourceName = SmartSigns, -- This is the name of the resource which Smart Signs is installed under
        }

    },

    saveSpeedsOnChange = true, -- If this is set to true, the speeds will be saved to locations.json when changed. If false, the speeds will reset on restart.
    saveTextOnChange = true, -- If this is set to true, the text will be saved to locations.json when changed. If false, the text will reset on restart.
    saveIconOnChange = true, -- If this is set to true, the icon will be

    
    closeMenuButton = {0, 177},

    -- This allows you to enable Discord logging for the signs
    -- You must add your webhook in sv_utils.lua
    logging = {
        enabled = false,
        displayName = Smart Motorways,
        colour = 31487,
        title = **New Sign Log**,
        icon = https://i.imgur.com/dcOQmpA.jpg,
        footerIcon = https://i.imgur.com/n3n7JNW.png,
        dateFormat = %d-%m-%Y %H:%M:%S, -- Day-Month-Year Hour-Minute-Second
    },

    resetSignsCommand = {
        enabled = true,
        commandName = resetsmartmotorway,
        Permissions = {
                EnablePermissions = false, -- If set to false, all below job checks will be disabled, even if they are enabled in the config.lua
                AcePermissions = {
                    Permission = update.motorway.sign,
                    Enabled = false,
                },
            
                ESX = {
                    Enabled = false,
                    CheckJob = {
                        Enabled = false, -- Enable this to use ESX job check
                        Jobs = {police} -- A user can have any of the following jobs, allowing you to add multiple
                    }
                },
                -- We've added vRP integration. All you need to do is enable it below. Then, configure if you wish to check for groups or permissions, or even both
                vRP = {
                    Enabled = false,
                    CheckGroup = {
                        Enabled = false, -- Enable this to use vRP group check
                        Groups = {police}, -- A user can have any of the following groups, meaning you can add different jobs
                    },
                    CheckPermission = {
                        Enabled = false, -- Enable this to use vRP permission check
                        Permissions = {police} -- A user can have any of the following permissions, allowing you to add multiple
                    },
                },
                -- We've added QBCore integration. All you need to do is enable it below. Then, configure if you wish to check for jobs or permissions, or even both
                QBCore = {
                    Enabled = false,
                    CheckJob = {
                        Enabled = false, -- Enable this to use QBCore job check
                        Jobs = {police}, -- A user can have any of the following jobs, meaning you can add different jobs
                    },
                    CheckPermission = {
                        Enabled = false, -- Enable this to use QBCore permission check
                        Permissions = {police}, -- A user can have any of the following permissions, allowing you to add multiple
                    },
                },
                -- We've added QBX integration. All you need to do is enable it below. Then, configure if you wish to check for jobs or permissions, or even both
                QBX = {
                    Enabled = false,
                    CheckJob = {
                        Enabled = false, -- Enable this to use QBX job check
                        Jobs = {police}, -- A user can have any of the following jobs, meaning you can add different jobs
                    }
                },
        },
    },

    selectSignCommand = {
        commandName = selectsign,
        Permissions = {
                EnablePermissions = false, -- If set to false, all below job checks will be disabled, even if they are enabled in the config.lua
                AcePermissions = {
                    Permission = update.motorway.sign,
                    Enabled = false,
                },
            
                ESX = {
                    Enabled = false,
                    CheckJob = {
                        Enabled = false, -- Enable this to use ESX job check
                        Jobs = {police} -- A user can have any of the following jobs, allowing you to add multiple
                    }
                },
                -- We've added vRP integration. All you need to do is enable it below. Then, configure if you wish to check for groups or permissions, or even both
                vRP = {
                    Enabled = false,
                    CheckGroup = {
                        Enabled = false, -- Enable this to use vRP group check
                        Groups = {police}, -- A user can have any of the following groups, meaning you can add different jobs
                    },
                    CheckPermission = {
                        Enabled = false, -- Enable this to use vRP permission check
                        Permissions = {police} -- A user can have any of the following permissions, allowing you to add multiple
                    },
                },
                -- We've added QBCore integration. All you need to do is enable it below. Then, configure if you wish to check for jobs or permissions, or even both
                QBCore = {
                    Enabled = false,
                    CheckJob = {
                        Enabled = false, -- Enable this to use QBCore job check
                        Jobs = {police}, -- A user can have any of the following jobs, meaning you can add different jobs
                    },
                    CheckPermission = {
                        Enabled = false, -- Enable this to use QBCore permission check
                        Permissions = {police}, -- A user can have any of the following permissions, allowing you to add multiple
                    },
                },
                -- We've added QBX integration. All you need to do is enable it below. Then, configure if you wish to check for jobs or permissions, or even both
                QBX = {
                    Enabled = false,
                    CheckJob = {
                        Enabled = false, -- Enable this to use QBX job check
                        Jobs = {police}, -- A user can have any of the following jobs, meaning you can add different jobs
                    }
                },
        },
    },

    directionColours = {
        [north] = 17,
        [south] = 18,
        [east] = 17,
        [west] = 18,
    },

    -- Here you can translate the resource into another language
    translations = {
        selectSignHelp = Select a smart motorways sign,
        editingSign = Now editing sign ID: ,
        hasBeenSetTo =  has been set to: ,
        speedLimitOfLane = Speed limit of lane ,
        symbolOfLane = Symbol of lane ,
        speedUnit = mph,
        resetAll = All lanes have been reset.,
        resetSignsHelp = Reset all Smart Motorways,
    },

    -- We do not recommend editing below this section:
    -- The offsets which the signs are placed at in comparison to the sign
    spawnOffsets = {
        -- Offsets for two lane setups
        [2] = {
            [1] = {x = -3.9, y = -2.1, z = 3.65},
            [2] = {x = 1.61, y = -2.1, z = 3.65}
        },
        -- Offsets for three lane setups
        [3] = {
            [1] = {x = -6.04, y = -2.2, z = 3.65},
            [2] = {x = -0.925, y = -2.2, z = 3.65},
            [3] = {x = 3.82, y = -2.2, z = 3.65}
        },
        -- Offsets for four lane setups
        [4] = {
            [1] = {x = -9.7801, y = -2.2, z = 3.65},
            [2] = {x = -3.21, y = -2.2, z = 3.65},
            [3] = {x = 2.52, y = -2.1, z = 3.65},
            [4] = {x = 8.0501, y = -2.1, z = 3.65}
        }
    },

    -- Here you can define the various locations of the signs around the map.
    -- Here you can configure the sound effect which is played when a sign is successfully updated
    soundEffect = {
        enabled = true,
        name = CONFIRM_BEEP,
        dict = HUD_MINI_GAME_SOUNDSET,
    },

    gantryModels = {
        [2] = `2_lane`,
        [3] = `3_lane`,
        [4] = `4_lane`,
    },
}